How to Install an Electric Fireplace Insert in an Existing Fireplace
Why bother with the mess and expense of a wood fire when you can have instant comfort and realistic flames with an electric fireplace insert? If you have a fireplace in your home, but you're tired of scooping out ashes then it's time to consider the electric fireplace heater alternative.
Today's electric fireplaces provide all the warmth and ambience of a real fire, but with a few notable advantages:
Fireplace Insert Installation Steps
Installation of an electric fireplace heater insert into your existing fireplace is quick and easy.
- Read the instruction manual that comes with your unit cover to cover. Each make and manufacture will have unique specifications you will need to be familiar with.
- Close damper in your chimney to prevent drafts. If this is going to be a permanent installation you might want to install fiber-free insulation around the interior of your firebox.
- Remove the grate from your existing fireplace and clean out all the ash and soot.
- Check the nearest outlet. Make sure it matches the electric requirements of your purchased electric fireplace insert. In most cases that will be:
- 15 amps
- 60 Hz
Your electric fireplace heater will probably require a dedicated circuit. If it's necessary to use an extension cord, make sure it is rated properly (see your manual).
- Unpack the fireplace. Remove and discard all packing materials from inside the unit.
- If your electric fireplace insert comes with a glass front, slide the glass panel into place and secure it according to the instructions in your manual.
- Put the electric fireplace insert into the fireplace opening. It may be necessary to tilt it slightly to fit it through the opening. Make sure it is upright and the feet are resting evenly on the bottom of the fireplace.
- Draw the cord under or around the fireplace insert, across the hearth, and plug it into the nearest outlet. Make sure the cord isn't pinched or rubbing against sharp edges. Plug it in.
That's it! Except for cleaning up all the mess of your old, wood fires, basic electric fireplace installation is a snap. Of course, there always a few extra steps you can take to customize your fireplace insert installation...keep reading!
Electric Fireplace Installation Options
If you don't like the look of a cord running across your hearth, you can hire a licensed electrician to:
- Install an electric outlet inside your fireplace, or
- Hardwire the fireplace directly to the electricity in your home.
Both of these are fairly permanent solutions, so make sure the electric fireplace insert is something you're going to be happy with.
Many electric fireplace inserts come with trim kits, decorative moldings that enhance the look of the fireplace (and fill any gaps between the fireplace insert and the edges of your fireplace opening).
If you're big on do-it-yourself projects, you can build your own custom firebox around your fireplace insert. One of the big advantages of electric fireplace inserts is that they don't require any clearance from mantels for safety reasons, so you can build with wood right up to the edge of the insert.
Glass ember beds
Some models of electric fireplace heaters include glass ember beds that simulate the look of real glowing embers. Once your insert is in place, you will need to pour the supplied glass rock media in the front tray of the firebox.
No built-in fireplace...?
If you live in a small home or apartment that doesn't have a built-in fireplace, or if you'd like the comfort and enjoyment a fire provides in a room without one, you can still enjoy the convenience of an electric fireplace heater. Check out our full selection of electric fireplace units, including mantel fireplaces, fireplace stoves and electric fireplace media consoles.