Available For The Qmark
Baseboard Heater 120 Volt Models
120-277 Volt Single Pole Thermostat TA1AW: Single pole thermostats break only
one side of the power line to your heater and cannot be turned ''off.''
Therefore, power is continuous to the heater even if it is not running. The
control knob will have a low temperature setting without an ''off'' position.
These thermostats generally have a temperature range of 40 to 90 degrees.
Duplex Receptacle RA1W: An optional accessory that attaches and makes an
additional two plug outlets for any baseboard heater.
120-277 Volt Double Pole TA2AW: A "Double Pole" is an older term for a switch that allows
you to turn both sides of the filament on and off - actually turning it
completely off making it much safer than leaving it always energized. Double
pole thermostats should be used for zonal heat systems such as electric fan
heaters, baseboard heaters, and radiant heaters.
Double Pole Wall Thermostat MD26: The same as a double pole, but is able to
be wall mounted.
120-277 Volt Two Pole Tamper-Proof Thermostat TA2TPAW: A standard two pole
thermostat but with a tamper proof guard that resembles a small disc covering,
which is only removable with a screwdriver. Once it is off, an inside stem is
clearly visible. This is then rotated with a screwdriver or with your fingers.
Inside Corner ICAW: Allows two baseboard heaters to be set up next to each
other on walls that are at a right angle to each other. If you were standing in
the corner, the point of the corner would point away from you.