Available For The QMark
Baseboard Heater 240 Volt Models
120-277 Volt Single Pole Thermostat TA1AW: Single pole thermostats break only one side of the power line to
your heater and cannot be turned ''off.'' Therefore, power is continuous to the
heater even if it is not running. The control knob will have a low temperature
setting without an ''off'' position. These thermostats generally have a
temperature range of 40 to 90 degrees.
120 Volt Duplex Receptacle RA1W: An optional accessory that attaches and makes an
additional two plug outlets for any baseboard heater.
120-277 Volt Double Pole TA1AW:
A "Double Pole" is an older term for a switch that allows you to
turn both sides of the filament on and off - actually turning it completely off
making it much safer than leaving it always energized. Double pole thermostats
should be used for zonal heat systems such as electric fan heaters, baseboard
heaters, and radiant heaters.
Double Pole Wall Thermostat MD26: The same as a double pole, but is able to be
120-277 Volt Two Pole Tamper-Proof Thermostat TA2TPAW: A standard two pole thermostat but with a
tamper proof guard that resembles a small disc covering, which is only removable
with a screwdriver. Once it is off, an inside stem is clearly visible. This is
then rotated with a screwdriver or with your fingers.
Inside Corner ICAW: Allows two baseboard heaters to be set up next to each other
on walls that are at a right angle to each other. If you were standing in the
corner, the point of the corner would point away from you.