You've never been as toasty when you use the Q-Mark 2544W Electric Baseboard Heater in your home. It features one exclusive heating element design that combines the durability of a steel tubular heater and the excellent heat transfer capabilities of aluminum fins. It also comes with many additional features that make it the perfect baseboard heater for warming your family room, bedroom, office and more!
Safe Design with Contemporary Style
For increased safety and a contemporary design, the top and front ends of this heater have rounded ends, eliminating sharp corners. There is also ground wire pigtails included in each box and a continuous capillary tube safety thermal cutout protection in case there is air flow blockage.
Hassle Free Installation
The Q-Mark 2544W baseboard heater is easily installed without disassembly. There are mounting holes in the rear of the cabinet, lead wires for quick connection to the ends of the heater, and knockouts at each ends for convenient installation. A Built-in cable clamp is included as well to restrain incoming cables without using additional hardware.
Maximum Air Flow
For maximum air flow, the Q-Mark 2544W electric baseboard heater has a chimney fin element. This feature directs warm air away from the walls so it's effectively disbursed throughout your space. It also helps ensure that walls do not end up with damage or discoloration.
Peace & Quiet
Unlike many of baseboard heaters, this Q-Mark heater offers an incredibly quiet design that's free of the popping and pinging normally associated with baseboard heaters. This means that you can relax and take a nap, watch your favorite movie or read a book without being distracted by unwanted noise from your baseboard heater.
Optional Accessories Available For The QMark Baseboard Heater 240 Volt Models
120-277 Volt Single Pole Thermostat TA1AW: Single pole thermostats break only one side of the power line to your heater and cannot be turned ''off.'' Therefore, power is continuous to the heater even if it is not running. The control knob will have a low temperature setting without an ''off'' position. These thermostats generally have a temperature range of 40 to 90 degrees.
120 Volt Duplex Receptacle RA1W: An optional accessory that attaches and makes an additional two plug outlets for any baseboard heater.
120-277 Volt Double Pole TA1AW: A "Double Pole" is an older term for a switch that allows you to turn both sides of the filament on and off - actually turning it completely off making it much safer than leaving it always energized. Double pole thermostats should be used for zonal heat systems such as electric fan heaters, baseboard heaters, and radiant heaters.
Double Pole Wall Thermostat MD26: The same as a double pole, but is able to be wall mounted.
120-277 Volt Two Pole Tamper-Proof Thermostat TA2TPAW: A standard two pole thermostat but with a tamper proof guard that resembles a small disc covering, which is only removable with a screwdriver. Once it is off, an inside stem is clearly visible. This is then rotated with a screwdriver or with your fingers.
Inside Corner ICAW: Allows two baseboard heaters to be set up next to each other on walls that are at a right angle to each other. If you were standing in the corner, the point of the corner would point away from you.